TV’s “Tool Man” had the word, and the word was “power.” That’s what owners of vintage muscle cars want in their classic machines, and that’s what they can get with crate engines and automotive engines from Auto Parts Fair.

If you’re finding problems with affording gas, there are ways that you can lessen the amount of gas your car uses. Improving the performance of your car not only makes it run better, but it helps save on gas as well. A lot of ideas to save gas is common sense. For instance, always park your car in the shade if you can. The hotter your car becomes, the more fuel it’ll be using. If you have a garage, make sure you keep your car in it. Make sure you keep that gas cap tightened up, as well. The more secure the cap is, the less you’ll have to worry about gas leaking out or evaporating.

Pump up your tires every chance you get. Your tires will wear down quickly if you drive around with them being flat. This will cause your car’s gas mileage to decrease up to 15%. Obviously, the engine will have to work harder to keep your car going, thus burning the fuel more quickly. Speaking of tires, you should check their pressure at least once a month. You can simply buy a digital gauge. Look in your owner’s manual to find out the recommended pressure for your model. Use that as a basis to go by when using your digital gauge. You should keep your tires inflated, even if the pressure is just a little bit below what it should be.

Keep a close eye on your air filters as well, and replace them when needed. Air filters in the engine can become clogged with insects and dirt, causing the engine to work harder. According to experts, a clogged air filter can decrease your gas milage by 10%, and will cost you an extra 15 cents a gallon.

Your car’s performance depends on proper maintenance and care. Keep up with your car’s performance often. Read the care guidelines in your manual, and make sure you go by them. No matter what type of car you have, it has to run a certain way and you should never neglect it.

Exedy Corporation, previously known as Daikin Manufacturing Company, is one of the largest suppliers of OEM clutch to the Japanese automotive market. Said company is a trusted supplier of General Motors and Ford Motor Company. Now, the company is offering its latest innovation called Exedy Clutch Kit.

The latest from Exedy is equipped with three components – the disc, release bearing and pressure plate. The company claims that said kit will serve as an all-in-one remedy to clutch needs. It is the solution that yields the perfect performance. According to experts, the latter can only be achieved when the pressure plate of the vehicle is suitably matched with the clutch disc. Latest developments in pressure plate, friction plate and throw out bearing design were incorporated to come up with a remarkable auto solution kit. Some of the kits offered by Exedy include the bearing and alignment tool.

Exedy is Japan’s leading supplier of racing clutches. It has gained a reputation of quality in its range of clutches. As a fact, racing and performance clutches of the company are designed, engineered and created to satisfy the standards of race clutches. They are not made from gray cast iron, which are manufactured from stock clutches. Compared to other performance clutch companies, Exedy uses ductile iron pressure plates to enhance safety especially in driving in harsh performance environments.

The racing clutches of the company uses organic friction materials to deliver optimum resistance to burst and slippage. To lessen drivetrain impact and shock, the clutch discs feature high capacity spring center dampers. The organic dampers, on the hand, are capable of handling modified engines. This is because they are manufactured with increased clamp loads.

Daikin Clutch USA, a subsidiary of the company, is also famed for its standard, heavy-duty, sports performance and racing clutches. According to some critics, this is the proof that Exedy is consistent with its commitment to deliver first-rate quality and service to vehicles across the globe. It can be noted that Daikin clutches are sold over the counter in about 80 countries. Said company was established in North America in the year 1968. Its products have been created in the U.S. since 1988. These products are designed to serve both aftermarket and Original Equipment clutch enthusiasts.

Exedy Clutch Kit is designed to execute more effectively that the conventional OE clutch. This is the breakthrough technology that the company is proud to convey to the auto parts industry.

Having high performance all season tires on your car makes you feel proud of you car but they can also save your life. Having good all performance tires is a must on any motorist car there very durable and they’re nice looking if you keep them well maintained up to service. You should really think about it. The whole point is that your life depends on your car; your car depends on your tires, that’s why you should keep your tires in good repair and service.

If you live in an area where the seasons change quite a bit and where you have a lot of rain as well as snow and ice in the winter then you need a good quality all season tire even more. If you own a sporty car or SUV then you will undoubtedly want to go with a high performance all season tire. Tire choices have really expanded over the years to include a diverse variety of sizes and styles so you need to educate yourself.

When you have all season performance tires there is to more in repairing them and servicing them than just changing the tire when the treads are warn out. It also means that you should rotate all four tires so that they are worn evenly. You also need to avoid the kind of driving that can really damage your tires. These activities can be hitting curbs or peeling out those are just some of the activities that can damage your tires. Taking a turn at a high rate of speed can really wear out your tires.

You will eventually have to change your all season performance tires, that kind of auto maintenance you will need the help of the professionals to do. I know that if you are a car nut, you probably just want to be able to handle everything yourself. Believe me, I have been there. Before I was a mechanic, I loved to work on my car by myself, and I would never take it in to a shop unless it was absolutely necessary. But if you’re going to change your all season performance tires you will need to take it to an auto care shop so it can be done by the professionals. You have to do this so that your tires are well balance and your car isn’t unsafe to drive. Unbalanced tires mean an unsafe car to drive. Nobody wants that, that’s why it is so important to get your tires changed by a professional.

If you’d like to increase the power and improve the performance of your car, you can install a high quality air intake kit. Air intake kits are some of the best car performance parts that you can buy. This will help lower the temperature of the air coming into the car in order to maximize the engine’s strength. This will not only make your car perform better, but it will also help you save on fuel costs. Air intake systems are also very easy to install!

You can unleash your motor’s full potential with a cold air intake. You’ll be feeding fresh, cool oxygen into your engine, which will release more horsepower. Your engine will love the fresh, cold air that you feed it with a performance air intake kit. This will also help create a pleasant sound. Your engine will be tapping into power that would normally go to waste. There are many different performance air intake systems to choose from, and they all help with ramping up your horsepower and torque.

Another good advantage of installing a performance air intake kit is that it’ll save you on fuel. Cooler air will allow your engine to run on less fuel, and you’ll save a lot of money on gas! It can save you around 1 – 5 miles per gallon!

You can find great deals on performance air intake systems online. Many of them come with long, lasting warranties. Some of them offer a “1,000,000 mile warranty” and some offer lifetime warranties! You’ll also receive easy-to-understand instructions on how to install it yourself, and you may find installation to be very simple. If you follow instructions carefully, it shouldn’t take you any more than an hour or two to successfully install your air intake system.

There are many ways you can improve the performance of your car. Everybody wants the greatest car possible, but not everyone knows how to improve theirs. Here are some simple tips you can use for improving your car’s performance.

-You can enlarge the rate and increase the usefulness of the engine’s combustion. You can do this by increasing the engine shifting.

-Use lightweight parts. Aluminum screws and titanium drive shafts, for instance, will lessen the weight of the car. The lighter your car, the greater the speed and the longer life expectancy for the battery.

-Get high speed parts for the steering wheel. This will give you faster steering. There are many quality steering parts to choose from that will allow you to successfully customize your wheel.

-Increase the suspension performance as well as the car handling. You can use tuned springs, sway bars, and shock absorbers filled with oil. My increase the suspension performance of your car, you can handle sharp corners better.

-Use high capacity batteries that will last for a very long time. They will help provide your car with maximum power.

-Get a fast, modified electric motor. It will provide greater speeds and power boosts. You can find great deals on them for as low as $19.99.

-Replace your stocked speed controller with electronic speed control. An electronic speed control (ESC) can be a stand-alone unit that you can insert into the receiver’s throttle control channel. You can also plug it into the receiver itself. An ESC will provide smooth throttle control, and will help make braking more precise.

Whether you want to improve the performance of your car for speeding purposes, safety reasons, or because you just want high performance, following these tips will help you. Get your car performing better and show it off to your friends today!

As the name states, Edge can give your diesel and extra edge over competition on the highway, in the streets and on your block. Extra horsepower, torque and mileage have been the driving force for the Edge brand since they started business, where outdoing the other guys making diesel performance parts is a top priority.

Hailing from the diesel truck haven of Ogden, Utah, Edge?s beehive of performance churns out some of the latest and greatest parts on a daily basis. From steady modules like the EZ to advanced monitors like the A2 with integrated GPS, Edge has been changing diesel trucks one product at a time. Team an Edge performance module with one of their high-tech monitors, and you get very real power gains that you can see and feel.

Edge makes sure that your truck not only gets thundering horsepower, grunting torque and relieving fuel economy gains, but that your ride quality is never sacrificed. Smooth fuel curves and shift points are a part of every Edge product. EGTs stay tame, boost pressure is optimized and timing is always in-step when you give your truck an Edge.

And the best place to get that Edge is by shopping online at the various performance part and accessories online shops that carry Edge. Many online sites stock the full lineup of Edge performance-boosting parts for your rig, and some offer them at already discounted prices that brick and mortar shops can’t offer.

I Found a few User Reviews about Edge Performance Chips and Control Modules:

“Brought the Edge Attitude Monitor to complete my addition of a controller after my installation of a Juice module. Originally intended to purchase the Edge Attitude A2 Monitor with GPS and backup camera, but decided that an independent GPS unit with an extra wiring harness and receiver would allow me the GPS utility in two vehicles. Love the easy of changing power levels as needed to meet my driving and towing needs. Really like the automatic defuelling as the EGT raises to the set point, because I was continually looking at my EGT temperature guage and speeding up and slowing down as needed to keep the EGT in a safe range. Really impressed with all of the extra other features available to me also.”

“I had the Edge Juice for about 3 months and adding the attitude makes it so easy make adjustments and the engine monitoring display gives me more comfort in letting me know the motor isn’t being over stressed.”

“If all the products advertised on E Bay worked as well as this one does, it would truly make shopping fun.I installed the product on my 2001 Dodge Deisel and was truly amazed at the difference it made. I felt as though I had a new truck, it pulls so much better, fuel mileage has increased, and again I say, it’s great.”

“I ordered the Edge Performance Chips for my 02 Ford F250. It was delivered promptly. The instructions were a little confusing. I called Edge Tech. Support and they were very helpful. In 5 minutes, it was installed. I have only used it on the default setting, and it added more power. I was hoping for a little better fuel savings. It did help save on fuel around town, but freeway driving did not seem to make much difference. I noticed my check engine light came on a couple of times when I accellerated quickly passing another vehicle. I don’t know why it came on, it had not done that before, but it went back off in a couple of minutes. I don’t know if it was related to the performance module or not. Overall, I liked the Edge product and wish I would have ordered on sooner.”

There is probably a transmission shop in almost every town in the country that can build a bulletproof transmission for American made vehicles. Whether it is a late model Mustang or a 60’s Chevelle, there are lots of aftermarket components and many years of technology available for the transmission rebuilder to utilize.

The same cannot be said for the 4EAT automatic transmissions found in Subaru vehicles. In factory form, these transmissions demonstrate several problem areas that can cause failure in as little as 20,000 miles with a stock engine and even sooner in modified applications.

Poor shift quality, anemic factory components, and above all, improperly configured torque converters plague the automatic transmission equipped vehicle. This is in conjunction with the automatic’s propensity to burn out the high clutch pack (third gear) and the 2-4 clutches (second and fourth gear) with even moderate increases in engine output.

Realizing the need to take import and sport compact automatics to their fullest potential, IPT Performance Transmissions- a New Jersey based company, committed a large portion of their research time and dollars toward improving the Subaru automatic transmission.

First up on the hit parade of internal modifications is the need to address the issue of valve body calibration. The valve body mods are really the foundation of any performance trans rebuild. An automatic transmission utilizes a network of valves, servos, solenoids, orifices, accumulators and passages that control and route hydraulic pressure to the appropriate places to apply the clutches and bands.

Without going into elaborate detail which would fall outside the scope of this article, suffice it to say that modifying the valve body effectively changes the rate of clutch apply and also increases the clamping force with which these components have to work with. This is why shift kits and modified valve bodies produce that firm, performance type shift that increases the transmission’s overall capacity for power handling.

Next, all critical support bushings need to be replaced to insure that the centerline of the transmission runs in perfect alignment with the centerline of the crankshaft. Ignoring this step puts a lot of undue stress on the internal transmission components.

Many of the other parts also such as the pinion shaft, the front differential ring gear and the planetary gearset undergo various metallurgical processes such as heat treating, Meta-Lax stress relieving, and cryogenic treatment (freezing them in liquid nitrogen at -300 degrees Fahrenheit to ‘reset’ the part’s structure on the molecular level).

Lastly, all of the required seals and gaskets are changed to materials that are better able to cope with the heat and stress that is common in high powered applications. Performance clutches and steel reaction plates are installed and their clearances set to much more exacting specifications than those that are used by the factory. Most importantly, IPT utilizes a proprietary six disk high clutch pack and a five disk 2-4 clutch pack which increases the second, third, and fourth gear torque capacity by over 25% versus the factory set up- this is the key to getting a high powered vehicle make a 1-2, 2-3, and 3-4 shift instead of just bouncing off the rev limiter.

As for the modifications outside of the gearbox, the next thing of importance is of course the torque converter. In an automatic equipped vehicle, one of the most important components in the entire car in regards to optimizing performance is a correctly configured converter.

In addition to being made with many strength improvements over the factory piece, a performance converter enables a vehicle to better take advantage of the RPM range at which maximum power is made. In simple terms, a properly designed converter will allow a vehicle to launch under more power by increasing the rpm at which the launch takes place. In essence, a torque converter is an infinitely variable transmission in and of itself, and altering its torque multiplying characteristics becomes absolutely necessary when other variables in the vehicle are changed (bigger turbos and bigger cams).

Even in otherwise stock turbocharged Subaru vehicles, ET reductions of over one full second are not at all uncommon with the addition of a properly configured converter.

Transmission, torque converter and valve body upgrades are not only for American made vehicles anymore. Increased performance, durability and more efficient shifting is now available for the vehicles of almost every manufacturer- thanks in part to the few companies that are willing to do the research and development work required for this rapidly growing segment of the automotive aftermarket.

For more information, please follow this link: http://www.importperformancetrans.com/subaruauto.shtml

-John Lombardo, IPT Performance Transmissions

There is probably a transmission shop in almost every town in the country that can build a bulletproof transmission for American made vehicles. Whether it is a late model Mustang or a 60’s Chevelle, there are lots of aftermarket components and many years of technology available for the transmission rebuilder to utilize.

The same cannot be said for the 4EAT automatic transmissions found in Subaru vehicles. In factory form, these transmissions demonstrate several problem areas that can cause failure in as little as 20,000 miles with a stock engine and even sooner in modified applications.

Poor shift quality, anemic factory components, and above all, improperly configured torque converters plague the automatic transmission equipped vehicle. This is in conjunction with the automatic’s propensity to burn out the high clutch pack (third gear) and the 2-4 clutches (second and fourth gear) with even moderate increases in engine output.

Realizing the need to take import and sport compact automatics to their fullest potential, IPT Performance Transmissions- a New Jersey based company, committed a large portion of their research time and dollars toward improving the Subaru automatic transmission.

First up on the hit parade of internal modifications is the need to address the issue of valve body calibration. The valve body mods are really the foundation of any performance trans rebuild. An automatic transmission utilizes a network of valves, servos, solenoids, orifices, accumulators and passages that control and route hydraulic pressure to the appropriate places to apply the clutches and bands.

Without going into elaborate detail which would fall outside the scope of this article, suffice it to say that modifying the valve body effectively changes the rate of clutch apply and also increases the clamping force with which these components have to work with. This is why shift kits and modified valve bodies produce that firm, performance type shift that increases the transmission’s overall capacity for power handling.

Next, all critical support bushings need to be replaced to insure that the centerline of the transmission runs in perfect alignment with the centerline of the crankshaft. Ignoring this step puts a lot of undue stress on the internal transmission components.

Many of the other parts also such as the pinion shaft, the front differential ring gear and the planetary gearset undergo various metallurgical processes such as heat treating, Meta-Lax stress relieving, and cryogenic treatment (freezing them in liquid nitrogen at -300 degrees Fahrenheit to ‘reset’ the part’s structure on the molecular level).

Lastly, all of the required seals and gaskets are changed to materials that are better able to cope with the heat and stress that is common in high powered applications. Performance clutches and steel reaction plates are installed and their clearances set to much more exacting specifications than those that are used by the factory. Most importantly, IPT utilizes a proprietary six disk high clutch pack and a five disk 2-4 clutch pack which increases the second, third, and fourth gear torque capacity by over 25% versus the factory set up- this is the key to getting a high powered vehicle make a 1-2, 2-3, and 3-4 shift instead of just bouncing off the rev limiter.

As for the modifications outside of the gearbox, the next thing of importance is of course the torque converter. In an automatic equipped vehicle, one of the most important components in the entire car in regards to optimizing performance is a correctly configured converter.

In addition to being made with many strength improvements over the factory piece, a performance converter enables a vehicle to better take advantage of the RPM range at which maximum power is made. In simple terms, a properly designed converter will allow a vehicle to launch under more power by increasing the rpm at which the launch takes place. In essence, a torque converter is an infinitely variable transmission in and of itself, and altering its torque multiplying characteristics becomes absolutely necessary when other variables in the vehicle are changed (bigger turbos and bigger cams).

Even in otherwise stock turbocharged Subaru vehicles, ET reductions of over one full second are not at all uncommon with the addition of a properly configured converter.

Transmission, torque converter and valve body upgrades are not only for American made vehicles anymore. Increased performance, durability and more efficient shifting is now available for the vehicles of almost every manufacturer- thanks in part to the few companies that are willing to do the research and development work required for this rapidly growing segment of the automotive aftermarket.

The Chrysler is an American car making house. The Chrysler has had mixed fortunes and has seen the good and the bad times alike. However the cars that are manufactured at Chrysler continue to be popular among its users. The Chrysler is a renowned car making brand and has lived up to its name by coming up with new cars that were technologically superior to other cars available at that time.

The Chrysler has recently introduced a chip that can comprehensively improve the performance of the car?s engine and hence its speed. This chip is known as the Chrysler performance chip that can be fitted to electronic control unit (ECU) of the car?s engine from where it can carry out the readings. It is a resistor that is fixed to the ITA sensors. Through these chips one can get that extra power and extra speed that he always wanted from his car.

By adding this Chrysler performance chip to your car, you can derive extra 20-50 HP from your engine. It is now conclusively established that almost all engines have some reserve capacity. By using this chip one can get the maximum output and utilize all the reserve energy of the engine. This chip continuously monitors the air-fuel mixture to the engine. By deciding on the exact ratio of the air and fuel the chip helps in improving the performance and speed of the car.

This Chrysler performance chip can be installed in any type of Chrysler vehicle provided that their engine is well maintained. Also the installation of this performance chip is extremely easy and can easily be done by following some simple guidelines from the instruction manual. The only thing needed is a home tool kit to fix the chip on to the car?s engine. If followed carefully, then the installation time will not be more than ten minutes.

However while buying the Chrysler performance chip; one must take care that a certain type of chip can only be installed in a certain model of the car. So you have to choose judiciously from among a gamut of these chips available in the market. Depending on the type of performance chip that you have bought, you can extract twenty to fifty HP more power from the engine. They are so designed that they get extra power from engine. Greater power directly implies that there is a generation of greater torque in your car and hence your car can move faster than before. These chips also closely watch the spark plugs and oxygen sensors. Many of these chips come with additional accessories which when installed can further enhance your car?s performance.

The Chrysler performance chip is a small chip that is fixed to the engine of the car. Such a process does not bring about any changes in the external appearance of the car. This performance chip is a product of extensive research carried out in this field. It is the best way to derive maximum power from the engine. The usage of such chip makes driving a very comfortable experience. These chips are programmable chips. They can be programmed for long as well as shorter drives.

So if it was always your wish to whizz down the roads of your street at very high speeds then this Chrysler performance chip is just for you. With these chips on your car your car will get an over all boost in terms of performance and speed. By installing these chips you can be rest assured of high output power from your engine. So go for this chip now to experience the fun of driving at high speeds.